22665276 - Sheet, Linear Scale SJ-740 (encoder strip)

Linear encoder strip – Roland SJ-740 – 22665276

The Roland 22665276 linear encoder strip (Sheet, Linear Scale SJ-740) is the optical scale mounted along the carriage rail of the SJ-740 and SJ-745EX. The encoder sensor continuously reads it to determine the exact position of the print heads.

Its 180 lines per inch (180 LPI) graduations provide the controller with a positional reference at every pass. This precision ensures accurate drop placement and bidirectional printing without misalignment.

Supplied on its own, in the original dimensions of 2550 × 15 mm, including mounting holes. Three options are available on this product page: New (original Roland part), Refurbished (inspected original part) or New / Compatible (strip manufactured by DG Spare Parts).

Technical specifications

• OEM part number: 22665276
• Manufacturer: Roland DG
• Part type: Linear encoder scale (encoder strip)
• Resolution: 180 LPI
• Dimensions: 2550 mm × 15 mm (total length, including holes)
• Axis concerned: Print carriage movement
• Delivery: Single part
• Condition: New (OEM), Refurbished or New / Compatible depending on the variant selected

Compatibility and use

• Roland SJ-740
• Roland SJ-745EX

‘New / Compatible’ version – manufactured by DG Spare Parts

• Strip cut in our workshop from a generic 180 LPI encoder strip, 15 mm wide, to the original length of 2550 mm.
• Supplied without fixing holes: these must be drilled by the customer by marking the position of the holes on their original strip.
• Same resolution and width as the original part, compatible with the existing encoder sensor.
• Made to order; does not carry the Roland manufacturer’s warranty.

Function

• To provide the encoder sensor with the carriage’s position reference
• Ensure synchronisation between the carriage’s movement and the print heads’ operation
• Ensure alignment of the forward and return passes
• Maintain the dimensional accuracy of prints

Possible symptoms of wear

• ‘Motor error’ or carriage stoppage during printing
• Misalignment or duplication of passes in bidirectional mode
• Fine, irregular streaks across the width of the media
• Scratches, ink marks or faded graduations visible on the tape

Replacing the encoder belt restores reliable carriage positioning and eliminates registration errors caused by impaired reading.

♻️ DG Spare Parts – European specialist in spare parts for large-format printers and plotters.

SP-FP-v1.4.0-20260930