SOLID STATE RELAY (JV5-160S) G3NE-220T-US DC5V - E102713

E102713 – Solid state relay (G3NE-220T-US DC5V) – Mimaki JV5-160S

The E102713 solid state relay (Solid State Relay G3NE-220T-US DC5V) is fitted to Mimaki JV5-160S printers.

It switches an electrical load (heater or actuator) without mechanical contact, on the command of the machine electronics. A failing relay leaves the load unswitched.

The housing bears OMRON G3NE-220T-US, with a load of 20 A at 240 V AC and a 5 V DC input. The Omron data sheet for the G3NE series specifies a load range of 75 to 264 V AC, zero-cross switching and a permitted current of 0.1 to 20 A with heat sink.

Technical specifications

• OEM reference: E102713
• Brand: Mimaki
• Part type: Solid state relay (SSR)
• Component model: G3NE-220T-US DC5V
• Shipping: Shipped ready to install
• Component manufacturer: Omron
• Model (housing): G3NE-220T-US
• Output (load): 20 A at 240 V AC, 50/60 Hz (housing); 75 to 264 V AC (Omron)
• Load current: 0.1 to 20 A with heat sink; 0.1 to 5 A without heat sink
• Inrush current: 220 A (60 Hz, 1 cycle)
• Input (control): 5 V DC (range 4 to 6 V DC), impedance 250 Ω ±20 %
• Terminals: 1 and 2 LOAD; 3+ and 4- INPUT
• Weight: approx. 37 g
• Note: Without a heat sink, Omron limits the load to 5 A. To reach 20 A, it recommends the Y92B-N100 heat sink or an aluminium plate of 300 × 300 × 3 mm.

Compatibility & use

• Mimaki JV5-160S (check the reference against your model)

Function

• Switches an electrical load without mechanical contact
• Drives the power supply of a heater or an actuator
• Provides fast, reliable switching on the control command

Signs of wear

• Heater or actuator not driven
• Faulty switching
• Electrical errors
• Inactive sub-system

Replacing this part restores the machine to proper working order.

♻️ DG Spare Parts – European specialist in spare parts for large-format printers and plotters.