W701407040 - ASSY,GRIT ENCODER BOARD VS-640
- -70%
✔️ Type: Grit (media feed) encoder board
✔️ OEM ref: W701407040
✔️ Reads the 360 LPI encoder disc of the feed axis (grit roller) and returns media position and speed to the servo board
✔️ Compatible: Roland RA, Roland RE, Roland RF (+2 series)
✔️ Brand: Roland
-
New or refurbished at the best price
-
Fast shipping within 24 hours
-
Worldwide delivery
Product description
W701407040 – Grit encoder board (Assy, Grit Encoder Board VS-640) – Roland VS-640
The grit encoder board (Assy, Grit Encoder Board VS-640, W701407040) is fitted to Roland VS-640 printers. It reads the media feed roller encoder and passes the position information to the control.
According to the Roland VS-640i Service Notes, this board is the optical sensor of the feed axis rotary encoder: it reads the 360 LPI slotted disc ("SHEET,ROTARY DISK SLIT 360LPI", 1000002162) mounted on the feed motor shaft ("ASSY,FEED MOTOR VS-640", 6701409040) and returns the media feed position and speed to the servo board. This encoder's feedback is compared with the CPU's setpoint: a deviation triggers the feed axis motor error.
Technical specifications
- OEM reference: W701407040
- Manufacturer: Roland
- Part type: Grit (media feed) encoder board
- Manufacturer designation: "ASSY,GRIT ENCODER BOARD VS-640" (Service Notes VS-640i, FEED MOTOR section)
- Location: Right side of the machine, on the feed motor assembly; access after removing the Right Cover, Right Top Cover, Chassis Cover, Panel Cover, Right Under Cover and Right Frame ("GRIT ENCODER REPLACEMENT" section)
- Associated encoder disc: "SHEET,ROTARY DISK SLIT 360LPI" (1000002162), 360 lines per inch
- Connection: "CABLE-ASSY,GRIT ENC VS-640I" cable (1000010559) to the servo board
- Check after replacement: Service Mode → MOTOR MENU → "G-ENC. CHECK": expected result "G-ENC. CHECK COMPLETED"
- Note: The VS-640i Service Notes list side by side W701407040 "ASSY,GRIT ENCODER BOARD VS-640" and W702407040 "ASSY,GRIT ENCODER VS-640I": the latter is the version for the "i" generation, not a replacement for the former. The equivalent reference 1000006498 given above could not be found in any Roland documentation or with any distributor consulted: it is kept for guidance. Compatibility with the RA-640, RE-640, RF-640/RF-640a and VS-300/420/540 comes from distributors; only the VS-640i is confirmed by Roland documentation.
- Shipping: Shipped ready to install
Compatibility & use
- Roland RA
- Roland RE
- Roland RF
- Roland RT
- Roland VS
- When fitting, keep a gap of around 1 mm between the sensor and the encoder disc; the disc must never touch the sensor while turning.
- The board is fixed with its plate; the "Grit Encoder Stopper" is held by 3 screws, motor shaft locked during tightening.
- A scratched encoder disc or one marked with fingerprints (1000002162) must be replaced at the same time: the board alone does not fix a "G-ENC. CHECK FAILED" caused by the disc.
- After replacement, run "G-ENC. CHECK" in Service Mode (MOTOR MENU); the Service Notes do not require any further feed calibration in this section.
Function
- Reads the 360 LPI encoder disc of the feed axis (grit roller) and returns media position and speed to the servo board
- Closes the feed motor ("Feed Motor") feedback loop: its signal is compared with the CPU setpoint
- Ensures the electronic control of a sub-system
- Passes the signals to the main board
- Acts as an interface between the firmware and the hardware
Signs of wear
- "MOTOR ERROR 0001" (Feed Motor Deviation Error): deviation between the CPU setpoint and the feed motor feedback — feedback supplied by this encoder; the manufacturer also cites the servo board, motor, lubrication, belt and limit position
- "MOTOR ERROR 0004" / "0008" (Feed Motor 1 and 2 overcurrent) and combinations "0005", "0009", "000C"
- "G-ENC. CHECK FAILED" in Service Mode: encoder mounting or alignment, feed motor fixing, scratched or dirty disc
- Sub-system not driven
- Electronic errors
- Loss of internal communication
- Erratic behaviour or machine stops
Replacing this part restores the machine to proper working order.
Equivalent references : W702407040 · 1000006498
Related parts
- 6701409040 — "ASSY,FEED MOTOR VS-640": feed motor carrying the encoder disc
- 1000002162 — "SHEET,ROTARY DISK SLIT 360LPI": encoder disc read by the board
- 1000010559 — "CABLE-ASSY,GRIT ENC VS-640I": cable between the encoder board and the servo board
- 1000010551 — "CABLE-ASSY,FEED MOTOR VS-640I": feed motor cable, same assembly
♻️ DG Spare Parts – European specialist in spare parts for large-format printers and plotters.
Compatibility
| Compatible with Roland® | Roland RA-640Roland RE-640Roland RF-640Roland RF-640aRoland RT-640Roland VS-300Roland VS-300iRoland VS-420Roland VS-540Roland VS-540iRoland VS-640Roland VS-640i |
|---|