1070076537 - PBA,SIGNAL LAMP
- -70%
✔️ Type: Signal lamp board (PBA)
✔️ OEM ref: 1070076537
✔️ Carries the four LEDs of the signal light and their driver stage
✔️ Compatible: Canon Colorado
✔️ Brand: Canon
-
New or refurbished at the best price
-
Fast shipping within 24 hours
-
Worldwide delivery
Product description
1070076537 – Signal lamp board (PBA Signal Lamp) – Canon Colorado
The signal lamp board (PBA, SIGNAL LAMP, 1070076537) is fitted to Canon Colorado printers. It drives the status signal light of the machine.
The board is identified by its "PBA.1070076537-03" label (revision A) on a bare PCB silk-screened "PB.1070076536-03". It is a small board carrying four surface-mount LEDs (V1 to V4), driven by a transistor stage (V6, V7) and connected to the machine through a 3-pin connector (X1): the signal light of the Colorado.
Technical specifications
- OEM reference: 1070076537
- Manufacturer: Canon
- Part type: Signal lamp board (PBA)
- Manufacturer designation: PBA, SIGNAL LAMP (Printed Board Assembly, Océ nomenclature)
- Assembly number: PBA.1070076537-03, revision A
- Bare PCB: PB.1070076536-03
- Connector: X1, 3-pin (power supply and control)
- Components observed: 4 SMD LEDs (V1 to V4) on the front side; transistors V6 and V7, resistors R1 330 Ω and R2 4.7 kΩ, capacitor C1 on the rear side
- Mounting: 3 mounting holes
- PCB marking: E207844 / STD-3 / 94V-0 (UL approval of the PCB manufacturer, shared with other Colorado boards)
- Shipping: Shipped ready to install
Compatibility & use
- Canon Colorado
- Check the cable and the 3-pin connector before replacing the board
Function
- Carries the four LEDs of the signal light and their driver stage
- Receives the power supply and the switch-on signal through the 3-pin connector X1
- Provides the electronic control of a sub-system
- Passes the signals to the main board
- Acts as an interface between the firmware and the hardware
Signs of wear
- Signal light off or LEDs only partially lit
- Signal light no longer following the machine status (signal received on X1 but no light)
- Sub-system not driven
- Electronic errors
- Loss of internal communication
- Erratic behaviour or machine stops
Replacing this part restores the machine to proper working order.
♻️ DG Spare Parts – European specialist in spare parts for large-format printers and plotters.
Compatibility
| Compatible with Océ-Canon® | Canon Colorado 1630Canon Colorado 1640Canon Colorado 1650 |
|---|