3010120604 - PCB-RFID Reader

RFID reader board (PCB-RFID Reader) Canon Océ Arizona — 3010120604

The RFID reader board (PCB-RFID Reader, 3010120604) fits Canon Océ Arizona printers. It reads the RFID chips (ink pack identification) and passes the information to the main board.

Its manufacturer designation is "PCB-RFID Reader" (Arizona 6100; "PBA, RFID control, board only" at a second distributor); the radio module it carries is certified as "RFID Module" under FCC ID "U2P-3010120604" and IC "6947A-3010120604" in the name of Canon Production Printing Netherlands. It replaces the former reference 3010105668. According to the module's FCC documentation, the board carries a single RFID reader, five antennas and a CPLD that selects the antenna being polled; the module operates at 13.56 MHz under 24 Vdc and identifies each ink pack to the machine controller.

Technical specifications

• OEM reference: 3010120604
• Manufacturer: Canon Océ
• Part type: RFID reader board (RFID reader board)
• Manufacturer designation: "PCB-RFID Reader" (Arizona 6100); radio module "RFID Module"
• Former reference: 3010105668 (replaced by 3010120604; FCC ID "U2P-3010105668")
• Radio certification: FCC ID "U2P-3010120604"; IC "6947A-3010120604" (Canon Production Printing Netherlands / Océ Display Graphics)
• Architecture: 1 RFID reader + 5 antennas + 1 antenna-selection CPLD (FCC documentation)
• Frequency: 13.56 MHz ("fast mode" tags)
• Power supply: 24 Vdc
• Serial clock: 4.16 MHz
• Note: Reference 3010120602, shown until now as equivalent, is not confirmed by any external source (distributors, FCC certification): it is kept as a reference point in our data, to be checked on the board fitted.
• Shipping: Shipped ready to install

Compatibility & use

• Canon Océ Arizona 350 GT
• Canon Océ Arizona 350 XT
• Canon Océ Arizona 360 GT
• Canon Océ Arizona 6160 XTS
• Canon Océ Arizona 6170 XTS
• Canon Océ Arizona série 2200
• Fujifilm Acuity Advance HD 2545
• Fujifilm Acuity Advance HD 2545 X2
• Fujifilm Acuity Advance HD 2565
• Fujifilm Acuity F66
• Fujifilm Acuity F67
• The board's radio module is FCC / IC certified: replace only with the certified reference 3010120604 (or its predecessor 3010105668), never with an RFID board from another generation. Before replacing the board, check the ink pack chip and its wiring.

Function

• Reads the RFID chips of the ink packs via a single reader and five antennas switched by a CPLD (module FCC documentation)
• Identifies and validates each ink pack with the machine controller
• Provides the electronic control of a sub-system
• Passes signals to the main board
• Acts as an interface between the firmware and the hardware

Signs of wear

• Ink pack not recognised or rejected although its chip and wiring are not at fault (cautious wording: no public manufacturer error code)
• Sub-system not driven
• Electronic errors
• Internal communication loss
• Erratic behaviour or machine stoppages

Replacing this part restores the machine to proper working order.

Equivalent references : 3010105668

♻️ DG Spare Parts – European specialist in spare parts for large-format printers and plotters.